Bag wrapper
There was a mountain of packages that occupied a whole drawer in the kitchen. And now there is a small box with packages. The whole secret is to roll packages with a simple device.
The author of the idea is Andrey Shayter https://www.youtube.com/watch?v=HEacniKGmWM
Simplified version from Steve Genom https://www.youtube.com/watch?v=1tVot6UQgAQ
Add comment
Random DIY
-
This is my first CNC machine assembled with my own hands from available materials. The cost price of the machine is about $170.
-
This device helped me to saw a bundle of rolled metal at an angle of 90 degrees without effort.
-
Today, instead of round guides, the printer received square, using a conventional aluminum profile tube with a cross section of 20 * 20 mm. Bearings roll along the pipe 623zz. All plastic parts were printed on the same printer before it was altered.
-
A simple planer from an old chisel, a couple of pieces of wood and two pieces of plexiglass.
-
The 3D model of the fan is very simple, easily wound on a collet clamp. I put it on my CNC machine. The first launch proved to be very good, all the chips are scattered to the sides, clean under the cutter.