LoadingBag wrapper
There was a mountain of packages that occupied a whole drawer in the kitchen. And now there is a small box with packages. The whole secret is to roll packages with a simple device.
The author of the idea is Andrey Shayter https://www.youtube.com/watch?v=HEacniKGmWM
Simplified version from Steve Genom https://www.youtube.com/watch?v=1tVot6UQgAQ
Add comment
Random DIY
-
I need a tachometer to calculate some mechanisms. For example, to calculate the speed of a robot vacuum cleaner, you need to know the rotation speed of the electric motor and, based on this, calculate the gear ratio of the gearbox. -
The idea of assembling a homemade CNC machine appeared long ago. Lack of knowledge and necessary details. Today there is everything! -
I present to your attention a homemade 3d printer. Assembled from plywood, aluminum, plastic and Arduino. This printer is unique in that its kinematics is peeped from Ultimaker, but done with quality modifications. -
The 3D model of the fan is very simple, easily wound on a collet clamp. I put it on my CNC machine. The first launch proved to be very good, all the chips are scattered to the sides, clean under the cutter. -
This is my first CNC machine assembled with my own hands from available materials. The cost price of the machine is about $170.
