Extruder for 3D printer

Bowden extruder for a 3D printer with minimal gaps and no extra parts. An eccentric is provided for compressing the spring and releasing the filament rod. Filament replacement with one hand, fixation of the Teflon tube directly on the housing.

The cheapest Chinese extruder served as a donor for a homemade extruder.

Add comment

Name

E-mail

Send

Random DIY

• 
  Homemade 3d printer v3.0

  I present to your attention a homemade 3d printer. Assembled from plywood, aluminum, plastic and Arduino. This printer is unique in that its kinematics is peeped from Ultimaker, but done with quality modifications.
• 
  Collet fan for CNC machine (chip pump)

  The 3D model of the fan is very simple, easily wound on a collet clamp. I put it on my CNC machine. The first launch proved to be very good, all the chips are scattered to the sides, clean under the cutter.
• 
  Rotary table for photo and video

  This small turntable is needed when you need to photograph something or shoot a video in 360 degrees. For the assembly you will need an old CD-drive, a couple of pieces of plywood, a box for batteries, a switch, wires and other trifles.
• 
  Robot WALL•E on a 3D printer + paper scan

  For my daughter, I printed a little Wally made of plastic, she is crazy about this toy, especially since dad made a toy.
• 
  Dancing robot-doll 【Miku Hatsune】

  A dancing robot with a height of 60 cm. You can use costumes and accessories. There is wireless control, you can control the movements of the robot.