LoadingRobot WALL•E on a 3D printer + paper scan
WALL•Eis a very cool robot! He is smart, interesting, funny, cleans up and sorts garbage, keeps order of things, repairs old appliances. And of course, Valley became a favorite of children and adults. For my daughter, I printed a little Wally out of plastic, she is crazy about this toy, especially since dad made a toy.
WALL•E has movable arms and head, the front cover opens. The tracks do not rotate, but they are not glued. WALL•E also has a shoe and a growing plant.
If you do not have a 3D printer, then the toy can be glued out of paper, there is a simple scan that any dad can handle within an hour.
Next, I'll just show you how the parts were printed on a 3D printer and how I glued the WALL•E robot. I printed on a homemade printer, green and red ABS plastic, there were simply no other colors. I wanted to paint the robot after assembly, but my daughter asked to leave the robot green.
Download sweep of WALL•E robot
Add comment
Random DIY
-
Bowden extruder for a 3D printer with minimal gaps and no extra parts. An eccentric is provided for compressing the spring and releasing the filament rod. -
This article is about how I collect my robot vacuum cleaner. There are a lot of photos and videos for those who also have such an idea. -
Today, instead of round guides, the printer received square, using a conventional aluminum profile tube with a cross section of 20 * 20 mm. Bearings roll along the pipe 623zz. All plastic parts were printed on the same printer before it was altered. -
There was a mountain of packages that occupied a whole drawer in the kitchen. And now there is a small box with packages. The whole secret is to roll packages with a simple device. -
This thermometer hung outside the window for several years, due to temperature changes the plastic mount literally crumbled into small pieces in hands. Repairing a thermometer with a 3D printer cost ten minutes of modeling and a few grams of plastic.
