LoadingStand for plywood for soldering iron
I decided to update the old, already charred stand for the soldering iron. Simple, convenient and does not take up much space on the table.
Cut out a stand of plywood 10 mm on the CNC machine. If desired, this can be cut and a hacksaw with a small tooth, and round holes to drill with a drill bit.
If you liked, you can download the drawings.
Download the drawings of the stand for the soldering iron + g-code
Buy a soldering iron and gadgets to it https://44ru.ru/c8PIPO
Add comment
Random DIY
-
A friend said like acoo kie, his wife said some windows :) And yet they spin! -
Today, instead of round guides, the printer received square, using a conventional aluminum profile tube with a cross section of 20 * 20 mm. Bearings roll along the pipe 623zz. All plastic parts were printed on the same printer before it was altered. -
It all started with the fact that I had a daughter :) Now she is 1.3 years old and she has already learned to deftly sit down to her daddy on her knees and read a book. Each child, like an adult, should have his own chair. Searches in children's shops were unsuccessful, the chairs are all plastic and large or with a hole for the pot. We needed a normal chair for sitting, for a very small girl. -
The idea of assembling a homemade CNC machine appeared long ago. Lack of knowledge and necessary details. Today there is everything! -
The 3D model of the fan is very simple, easily wound on a collet clamp. I put it on my CNC machine. The first launch proved to be very good, all the chips are scattered to the sides, clean under the cutter.
