Square gears from plywood
A friend said like acoo kie, his wife said some windows :) And yet they spin!
I did not come up with square gears, I just repeated. Recently I collected a CNC machine tool and I really wanted to cut out such gears from plywood.
For those who want to cut out such gears, I attach g-code for the machine. In the archive there are two versions of the gears and the source files dxf.
Download square gears (g-code + dxf)
Add comment
Random DIY
-
A dancing robot with a height of 60 cm. You can use costumes and accessories. There is wireless control, you can control the movements of the robot.
-
The 3D model of the fan is very simple, easily wound on a collet clamp. I put it on my CNC machine. The first launch proved to be very good, all the chips are scattered to the sides, clean under the cutter.
-
I made this CNC machine myself in 2015, videos of the same year. For a long time I was asked to make a video on the assembly of this machine, later my hard drive broke, by some miracle I found some materials on this machine on another medium. After almost 4 years I will publish the materials, as I did with my own hands a CNC machine tool from the available materials.
-
I decided to update the old, already charred stand for the soldering iron. Simple and does not take up much space on the table.
-
The idea of assembling a homemade CNC machine appeared long ago. Lack of knowledge and necessary details. Today there is everything!