↑ Up

Children's chair own hands (drawings dwg)

It all started with the fact that I had a daughter :) Now she is 1.3 years old and she has already learned to deftly sit down to her daddy on her knees and read a book. Each child, like an adult, should have his own chair. Searches in children's shops were unsuccessful, the chairs are all plastic and large or with a hole for the pot. We needed a normal chair for sitting, for a very small girl.

Here he is a stool, made by himself for a couple of evenings, not a work of art, but very comfortable and the daughter has taken a look!

Children's chair own hands (drawings dwg)

Drawings of no originally was not, everything is done by eye.

On the photo My daughter is already sitting on a new chair :)

Children's chair own hands (drawings dwg)

The highchair is made of 8 mm plywood. The parts are glued together with PVA glue, several screws and the whole construction is coated with an uncoated varnish in one layer. The weight of the stool is 715 grams, the child quietly drags him around the apartment.

Height from the floor to the seat of 180 mm, the size of the cover for sitting 240х190 mm, the height of the chair from the floor to the top of the backrest 360 mm, the backrest dimensions 235х115 mm.

Children's chair own hands (drawings dwg)

The test version of the chair was made of cardboard in three minutes. It was made in order to get an approximate size and understand how comfortable it will be for the child. To sit the kid on this chair did not work out very well, but in size it turned out to be all right!

Children's chair own hands (drawings dwg)

Further on pieces of plywood with pencil I drew the details of the chair. First drilled holes with perovy drills, everything by eye :) Large holes sawed by an electric jigsaw.

Children's chair own hands (drawings dwg)

To make the second part of the chair, I simply sketched the first pencil and also cut it with a jig saw.

By the way, I must say about the connection of parts. Initially, I intended to do everything without screws and nails, and since everything was done impromptu, there were no mistakes. On the picture below it is seen that the parts have thorns, the detail on the right of one spike is not enough, I forgot to draw and sawed it :)

Children's chair own hands (drawings dwg)

I spiked the parts on the left later, too, sawed, so the back had to be fastened with screws.

Below in the photo the detail of the backrest and the detail that is under the seat, it does not allow the chair to swing. On this detail, too, there should have been thorns, about which I also forgot :)

Highchair with own hands + drawings

After all the details of the chair have been cut out, everything needs to be cleaned with sandpaper, I spent a lot of time on it, so that not a single skate! After all, we glue the PVA glue or twist the screws, if suddenly you like and I forget to make the spikes :) Finally, we cover the product with a layer of varnish or as now fashionably do decoupage. I would like to paint the chair with bright colored paints, but so far I have left a pure color of the tree.

Children's chair own hands (drawings dwg)

It's time to share the drawings. As such, there was not, and so I just skimmed the details on paper, drew the missing spikes :) and scanned.

Update: Cut a few such chairs on the CNC, so I had to move the drawings to AutoCAD.

Download baby chair drawings

Alice: & quot; And still I'll sit on Papa's chair!" :)

Highchair with own hands + drawings

Send photos of your chairs and happy smiles of kids, the address of the mail on the page contact.


Add comment

Avatar Name

E-mail





Random DIY